Polyimide Heating Film (AP-002)
Basic Info
Model No.: AP-002
Product Description
Model NO.: AP-002 Russia: Japan Installation: Portable All-Polyimide (AP) Heating Film (AP-002)
Overview
Ap Heating Film is a high performance alternative to our standard polyimide Heating films, allowing higher temperatures and watt densities. Our unique ability to manufacture these heating films has prompted success in many high-temperature applications worldwide.
AP heating film must be factory mounted or clamped to heat sinks, and are only available as custom designs.
Benefits of All-Polyimide Heaters
1. Thin, lightweight heaters allow you to apply heat where it's needed ultimately reducing overall operating costs
2. Etched-foil heating technology provides efficient thermal cycling of samples for increased throughput
3. Low mass construction and factory lamination saves space and reduces cycle time
4. Custom profiling offers uniform thermal performance of heating output for improved processing yields and productivity
5. Maximum operating temperature of 260° C offers a higher temperature range than any other flexible film Heater for maximum design flexibility
6. Turnkey assembly solutions can drastically reduce assembly time and provide lowest total cost of operation
Features of All-Polyimide Heaters:
1. Available in round, rectangular, and irregular shapes
2. Power ratings to 120 W/in² (18.60 W/cm² )
3. Resistant to most chemicals
4. Optional built-in temperature sensors
5. Exceptional temperature uniformity when designed with a heat-profiled foil pattern
6. Can be factory bonded to mating parts with no clamping hardware
Typical applications:
1. Semiconductor wafer processing
2. Heating of electronic components
3. Packaging, fusing, and splicing equipment
4. Medical diagnostic analyzers
Specifications:
Temperature range: -200 to 260° C (-328 to 500° F).
-200 to 240° C (-328 to 464° F).
Lead wires: Stranded, PTFE insulated, AWG 30 to AWG 20.
Heater thickness:
Over element: 0.012" (0.3 mm) max.
Over lead wire terminations: 0.150" (3.8 mm) ref.
Dielectric strength: 1000 VRMS at 60 Hz for 1 minute.
Insulation resistance: 1000 Meg ohms min, at 500 V (DC).
Out gassing: 0.36% total mass loss, 0.01% collected volatile
Maximum size: 22" x 45" (560 x 1145 mm).
Maximum resistance density: 1500 Ω /in² (233 Ω /cm² ).
NOTE: If the above parameters are not suitable for you, we can customize according to your voltage, size, power and other requests.
For more information, please connect our sales manager. Contact us if you need more details on Flexible Heating Film. We are ready to answer your questions on packaging, logistics, certification or any other aspects about All-Polyimide Film、Ap Heating Film. If these products fail to match your need, please contact us and we would like to provide relevant information.
Overview
Ap Heating Film is a high performance alternative to our standard polyimide Heating films, allowing higher temperatures and watt densities. Our unique ability to manufacture these heating films has prompted success in many high-temperature applications worldwide.
AP heating film must be factory mounted or clamped to heat sinks, and are only available as custom designs.
Benefits of All-Polyimide Heaters
1. Thin, lightweight heaters allow you to apply heat where it's needed ultimately reducing overall operating costs
2. Etched-foil heating technology provides efficient thermal cycling of samples for increased throughput
3. Low mass construction and factory lamination saves space and reduces cycle time
4. Custom profiling offers uniform thermal performance of heating output for improved processing yields and productivity
5. Maximum operating temperature of 260° C offers a higher temperature range than any other flexible film Heater for maximum design flexibility
6. Turnkey assembly solutions can drastically reduce assembly time and provide lowest total cost of operation
Features of All-Polyimide Heaters:
1. Available in round, rectangular, and irregular shapes
2. Power ratings to 120 W/in² (18.60 W/cm² )
3. Resistant to most chemicals
4. Optional built-in temperature sensors
5. Exceptional temperature uniformity when designed with a heat-profiled foil pattern
6. Can be factory bonded to mating parts with no clamping hardware
Typical applications:
1. Semiconductor wafer processing
2. Heating of electronic components
3. Packaging, fusing, and splicing equipment
4. Medical diagnostic analyzers
Specifications:
Temperature range: -200 to 260° C (-328 to 500° F).
-200 to 240° C (-328 to 464° F).
Lead wires: Stranded, PTFE insulated, AWG 30 to AWG 20.
Heater thickness:
Over element: 0.012" (0.3 mm) max.
Over lead wire terminations: 0.150" (3.8 mm) ref.
Dielectric strength: 1000 VRMS at 60 Hz for 1 minute.
Insulation resistance: 1000 Meg ohms min, at 500 V (DC).
Out gassing: 0.36% total mass loss, 0.01% collected volatile
Maximum size: 22" x 45" (560 x 1145 mm).
Maximum resistance density: 1500 Ω /in² (233 Ω /cm² ).
NOTE: If the above parameters are not suitable for you, we can customize according to your voltage, size, power and other requests.
For more information, please connect our sales manager. Contact us if you need more details on Flexible Heating Film. We are ready to answer your questions on packaging, logistics, certification or any other aspects about All-Polyimide Film、Ap Heating Film. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Polyimide Heating Film
Premium Related Products
Other Products
Hot Products
2000W bath heater used in home with CE certificateXXL-3000G with gas as the fuel portable gas heaterIH-1508 Infrared electric heaterPortable dual functional camping heater2 in 1 Mixing and boiling potVertical electric kebab grill with TimerPortable butane gas heater,living room gas heater,lpg room heatersSlimline electric wall heaters, fired heater, wall mounted electric heaterDouble stove cooktop,cassette gas stove,burner stoveFolding mini gas hiking stove14" oscillating fan, windy fan, high temperature fan16" AC & DC automatic conversion standing fan, rechargeable fan, motor fan16'' ac fan, water spray fan, axial fan56" DC ceiling Fan, 12v fan, dc brushless fan 12vDC 5V program usb led fan8 inch exhaust fan, smoke exhaust fan, portable kitchen exhaust fan